Payment & Shipping Terms:
|Package:||Wooden Case||Average Wind Velocity:||0.36m/s~0.54m/s|
|Seal:||Gasket / Gel Sealed||Feature:||Mobilizable|
Negative pressure weighing room laminar flow hood for pharmaceutical factory for GMP
Negative Pressure Weighing Room provides containment by utilizing high velocity air to capture air borne dust particles. Control exposure risk to hazardous materials for a wide variety of equipment and processes. Protecting the operator during sensitive tasks, this complied with GMP practices.
Applications: dispensing booth subdivision of powder or liquids, charging and offloading materials to reactors, fluid bed dryers, granulators, filter dryers, glass ware skids in clean rooms and so on.
1: dispensing booth modular. Easy-to clean rigid design with minimal joints
2: HEPA/ULPA Gel-seal down flow filter are replaceable from within the booth. Gel-seal is more reliable than conventional gasket seals
3: Voltage-compensating blowers ensure stable air flow.
4: Magnehelic Gauges provide convenient and reliable means for monitoring gauges air flow and filter condition.
5: Containment performance verified according to the ISPE good practice guide, assessing the particulate containment performance of pharmaceutical equipment.
|Item No.||ID - FT3A43R||ID - FT3A66R||ID - FT3A97F||ID - FT4A43P|
|Material||SUS 304 Fingerprint Proof|
|Roof||Uniform flow film|
|Clean Class||ISO CLASS 5 (100 class)|
|Outter Size (W x D x H)||1500 x 1500 x 2600 mm||1900 x 2600 x 2600 mm||6100 x 2800 x 2900 mm||1500 x 1500 x 2600 mm|
|Inner Size (W x D x H)||1400 x 1000 x 2000 mm||1800 x 1800 x 2000 mm||6000 x 2200 x 2200 mm||1400 x 1000 x 2000 mm|
|Working Size (L x W x H)||800*600*800 mm||1200*600*800 mm||N.A||800*600*800 mm|
|Service Rating||2.4 kW||4.6 kW||11.2W||3.2 kW|
|Average Wind Velocity||0.36m/s~0.54m/s|
|PAO Test Size||Φ8MM|
|Operation Separate||PC 10” glove|
|Air Velocity Transducer||0-1 m/s||optional|
|Light||≥400 Lux||≥300 Lux|
|Anti-hazard classificaiton||N.A||EX d II BT4|
|Outlet||220V/1P,10A IP66||220V/1P,10A EX dII BT4|
Our equipment is warranty for 1 year excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.
Consumable parts illustration:
1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.
2: HEPA air filter: each one should be replacement in each half and one years.
Standard export packing:
--Stretch film strapped whole cabinet,
--Foam inside protected,
--Plywood case solid fixed
--European standard bottom tray
What you can get from us?